- Express delivery and free returns within 30 days
- contact@ramaudiohub.com
- +1 (407) 537 6199
$87.00
Your orders are shipped seamlessly between countries
You have the right to return your orders within 30 days.
Your payments are secure with our private security network.
Quick Overview The Dayton Audio Classic Series subwoofers offer solid value at lower price points. No compromises were made in the design, materials, or construction of these rugged 4-ohm powerhouses. Product Highlights Sturdy stamped steel frame Vented pole piece and bumped back plate Inductance-reducing copper pole piece cap Treated non-pressed paper/Kevlar cone with rubber surround 4-layer VC with polyimide former Great for home and automotive applications Product Manuals / Spec Sheets / Downloads Dayton Audio DCS165-4 Specification Sheet Dayton Audio DCS165-4 Data Files AddThis Sharing Buttons Share to FacebookFacebook Share to TwitterTwitter Share to MoreAddThis 10 Product Description The Dayton Audio Classic Series subwoofers offer solid value at lower price points. No compromises were made in the design, materials, or construction of these rugged 4-ohm powerhouses. The drivers feature a vented pole piece with copper cap, bumped back plate for improved excursion capability, Kevlar reinforced paper cone with rubber half-roll surround, and a high-temperature 4-layer copper voice coil wound on a polyimide former. Product Details Speaker Series Classic Series Model Number DCS165-4 List Price $55.99 Color Black Unit of Measure Each UPC 848791001901 Warranty – Parts 5 Years Warranty – Labor 5 Years Product Shipping Weight (lbs.) 4.85 Speaker Type Subwoofer Nominal Diameter 6.50″ Power Handling (RMS) 100 watts Power Handling (max) 200 watts Continuous Program Power — Impedance 4 ohms Sensitivity 87.4 dB @ 2.83V/1m Frequency Response 36 – 1 100 Hz Voice Coil Diameter 38.5 mm Magnet Weight — DC Resistance (Re) 3.4 Ohms Voice Coil Inductance (Le) 1.43 mH @ 1 kHz Resonant Frequency (Fs) 35.7 Hz Mechanical Q (Qms) 6.62 Electromagnetic Q (Qes) 0.36 Total Q (Qts) 0.34 Diaphragm Mass Inc. Airload (Mms) 39.5g Moving Mass Of Diaphragm (Mmd) — Mechanical Compliance of Suspension (Cms) 0.5 mm/N Surface Area Of Cone (Sd) 124.7 cm² Volume of Displacement (Vd) 74.8 cm³ BL Product (BL) 9.15 Tm Compliance Equivalent Volume (Vas) 12.1 liters Maximum Linear Excursion (Xmax) 6 mm Drivers Mechanical Losses (Rms) — Cone / Diaphragm Material Paper / Kevlar Cone Entry / Exit Diameter — Surround Material Rubber Voice Coil Wire Material Copper Voice Coil Former Kapton®/Polyimide Basket/Frame Material Steel Magnet Material Ferrite Overall Outside Diameter 6.57″ Overall Depth 3.25″ Baffle Cutout Diameter 5.62″ # Mounting Holes 8 Mounting Hole Diameter — Bolt Circle Diameter — Product Weight —
4-layer VC with polyimide former allows high power handling
Vented pole piece and bumped back plate provide plenty of VC travel with minimal compression
Copper pole piece cap minimizes inductance
Rigid non-pressed treated paper/Kevlar cone with rubber surround
Great for home and automotive applications
Draughn –
I bought these for a bluetooth speaker I made. These were the dedicated low frequency subs and they do their job well for a six inch sub woofer. I also purchased one inch tweeters, four inch mids, and regular six inch mid range woofers for the primary left and right channels. These subs added the desired low frequency response I was looking for. I actually really like Dayton Audio stuff. Just know exactly what you are buying, and exactly what you want to use it for, pair it with the proper enclosure and power, and they are great speakers. Now I have a stupid loud bluetooth speaker that puts all those tiny ones to shame., and sounds great at low volumes all the way up to full blast.
Ram Customer –
Drove a pair of these in the rear doors of a Ram 2500 with a 4 channel Pioneer 1000w amp. Set the crossover around 200 hertz. It had a good tight bass sound. I was hearing some rattling at certain frequency until I closed the doors. Probably an air pressure thing. I had to grind the openings out a bit and drill new holes. It wasn’t a direct fit.
Optimus Prime Member –
These are quality built speakers. We have limited space for our surround sound and these fit the bill perfectly. We had to compromise between sound volume and clean install. I used a Fosi amp to power these and they sound great.